Hike & Fly & More
Universally employable, twice as comfortable and useful. The EASINESS 3 light reversible harness can take you on the most varied of adventures – thanks to its modular design concept – whether Hike & Fly, thermaling or traveling. The detachable airbag with integrated reserve provides maximum safety, and many small but quality details round off this product.
“What, there's a paraglider in there?” The compact look of the EASINESS 3 makes this a question you will soon get used to. Legpads and inflating protector seem light and compact, but the whole package is light as well. As harness and rucksack we start at 1.75 kg, and for an additional 500 gms you get a fully protecting protector, including reserve compartment and connection lines.
The Airbag-Protector, attached by zips and bullet toggles, moulds into the harness shape, and can be easily removed and replaced by a cover. In its transport mode the quick-change EASINESS 3 is transformed into a proper mountain rucksack with detachable hip strap, helmet net and holders for hiking poles and ice axe.
Ergonomically-shaped back support and wide shoulder straps provide good rucksack carrying comfort on walk-ups; 3D designed seat shell, long Legpads and perfectly apportioned speed system loading guarantee relaxed and enjoyable flight. Adequate rucksack and back pocket storage, and additional pockets for both modes contribute to overall comfort.
The EASINESS 3 comes with an already mounted LTF certified Airbag-Protector. The reserve compartment is built into the Airbag-Protector. The Airbag-Protector also functions fully when a reserve is not installed. In this case the reserve compartment is closed by dummy closure cables.
Thanks to modern 3D methods of harness development the no-seatboard EASINESS 3 fits the pilot’s body perfectly in flight. Enhanced and lengthened Legpads, and individually adjustable lower back support guarantee maximum flying comfort. Legpad effectiveness and sophisticated harness geometry also give the reversible harness precise weightshift response. EASINESS 3 comfort begins on the ground: the Legpads allow maximum freedom of movement for takeoff and landing.
The EASINESS 3 with mounted Airbag-Protector impresses with a nice and clean silhouette for a Hike & Fly harness. The Airbag-Protector, which is fully integrated, can be easily zipped off if needed.
The EASINESS 3 will be delivered with a Soft-Speedbar. The harness speed system has easy-running Ronstan ball-bearing pulleys and comes ready-mounted.
|Carabiner height||cm||ca. 44*||ca. 45*||ca. 47*|
|Chest strap width||cm||43||44||45|
|Weight with backside-cover (ready to fly)||kg||1.75||1.8||1.9|
|Weight with protector (ready to fly)||kg||2.25||2.3||2.4|
|Harness certification||EN / LTF||EN / LTF||EN / LTF|
|Load test||EN 1651 & LTF 91/09, 120kg||EN 1651 & LTF 91/09, 120kg||EN 1651 & LTF 91/09, 120kg|
|Shoulder straps||Polyester, 15mm, 13.2kN|
|Seat area||Nylon Oxford 210D PU3|
|Airbag sides||Nylon Robic 100D, 122g/m2 g/m2|
|Carabiner||Foras, Twist Lock, 23kN, 51gr.|
|Main straps||Dyneema, 10mm, 13.5kN|
|Safe-T-buckle System||AustriAlpin Alu-Beltbuckle|
|Rucksack outside||Nylon 240T - Dia Ripstop|
|Airbag base||Nylon Ripstop 210D PU3|
|Outer covering||Nylon Robic 100D, 122g/m2 g/m2|
This might also interest you